Pump selection knowledge base

16 pump questions, answered.

Practical answers across all nine JIABO pump ranges, from solar and multistage to chemical, sewage and engine-driven water pumps. Confirm final performance and materials against the current model datasheet and curve.

Browse the full selection guides →
01

What information does JIABO need to select an industrial pump?

Send the liquid, required flow, total dynamic head or discharge pressure, temperature, solids or viscosity, suction conditions, power supply, installation arrangement and preferred materials. An exact model should be checked against the current datasheet and performance curve.

Open the pump selection guide →
02

How do I choose the correct solar water pump?

For a deep well, provide bore diameter, static and dynamic water levels, delivery height, pipe length and required daily water volume. For a surface pump, provide suction lift and source conditions. Then match the complete pump, controller and solar array at the required duty point.

Compare solar water pumps →
03

Should I use a centrifugal pump or a multistage pump?

A centrifugal pump is commonly considered for general water transfer and circulation. A multistage pump is often investigated when higher pressure or head is required. Final selection depends on the flow and head together, not the pump family name alone.

Compare centrifugal and multistage pumps →
04

Which pump is suitable for viscous liquids or sludge?

Progressive cavity, diaphragm or sludge plunger pumps may be candidates depending on viscosity, solids size and concentration, abrasiveness, required flow and discharge pressure. Provide the fluid data before choosing rotor, stator, diaphragm, seal or wetted materials.

Read the viscous-liquid selection guide →
05

What is the difference between QBY and DBY diaphragm pumps?

QBY is an air-operated diaphragm pump range and DBY is an electric-drive diaphragm pump range. Choose first by the available utility and site requirements, then verify flow, pressure, liquid compatibility and the exact diaphragm and wetted materials.

Compare diaphragm pump ranges →
06

How do I select a submersible sewage pump for solids?

Provide the required flow and total dynamic head, pit depth, discharge connection, solids size and concentration, fibers, liquid chemistry and electrical supply. A product photo cannot establish the solids passage of a specific model.

Explore sewage and drainage pumps →
07

Can a self-priming oil pump handle any type of oil?

No. Oil grade, viscosity at operating temperature, vapor and safety properties, required flow and pressure, suction lift, seal materials and any hazardous-area requirement must be checked for the exact model.

Review oil pump selection information →
08

Are maximum flow and maximum head available at the same time?

Usually not. Maximum flow and maximum head are different endpoints on a pump curve. Use the performance curve to find the expected flow at the required total dynamic head, then confirm motor loading and operating limits.

Learn how to specify the duty point →
09

Does JIABO support OEM, ODM and distributor enquiries?

Yes. JIABO accepts OEM and ODM enquiries and welcomes pump distributors and project partners. Send the target market, product range, technical requirements, branding needs, certification needs and expected annual demand for review.

View the JIABO company profile →
10

How can I request a datasheet, quotation or model recommendation?

Use the website inquiry form or contact sales@jiabofluid.com. Include your company and contact details, pump series if known, liquid, flow, head or pressure, voltage, location, materials and quantity so the request can be reviewed efficiently.

Send a pump inquiry →
11

How do I size a progressive cavity screw pump for sludge?

Provide the sludge's viscosity at operating temperature, solids size and concentration, abrasiveness, required flow, differential pressure and suction conditions. Ask JIABO to confirm the exact rotor, stator, seal and drive arrangement; a screw pump should not be assumed safe for dry running.

Read the screw pump guide →
12

What should I check before selecting a centrifugal water pump?

Match the required flow and total dynamic head on the same current model curve. Then check the lowest suction level, water temperature, available NPSH, operating range, motor supply, wetted materials and piping arrangement.

Read the centrifugal pump guide →
13

How do I choose a chemical pump for an acid or alkali?

Give the exact chemical, concentration, temperature, density, viscosity and any solids or cleaning fluids. Confirm compatibility of every wetted component—including lining, impeller, seal and elastomers—and request the exact model curve and operating limits.

Read the chemical pump guide →
14

How do I choose between a gasoline and diesel water pump?

Start with required water flow and head at one operating point, suction lift, hose length, water quality and expected run time. Then compare fuel availability, engine rating and the exact pump-engine curve. A 20 HP label or connection size alone does not prove a duty point.

Read the engine-driven water pump guide →
15

Is a self-priming oil pump suitable for fuel or dry running?

Not automatically. Self-priming capability has model-specific conditions and does not imply continuous dry-running ability. Fuel compatibility, seal materials and any hazardous-area requirements must be confirmed separately for the exact unit.

Read the oil and self-priming pump guide →
16

Does a sewage pump's outlet size tell me its solids passage?

No. The impeller design and exact model determine verified solids passage and fiber-handling capability. Provide the wastewater composition, pit levels, required flow and head, installation type and power supply.

Read the sewage pump guide →

Technical confirmation

Need an exact pump recommendation?

Send the operating conditions and request the current model table, datasheet and curve.

Send an inquiry

Leave your pump requirements.

Include the model if known. For selection help, add the liquid, required flow, head or pressure, power supply, and installation conditions.

Email: sales@jiabofluid.comTel: +86 571 2328 1234Solar pump WhatsApp: +86 133 4581 6945Other pumps WhatsApp: +86 137 6186 8190
No. 788, Jintang Road, Jiangnan Town, Tonglu County, Hangzhou City, Zhejiang Province, China

Your inquiry is sent directly to JIABO sales. Form details are processed by our delivery service to email them to us.