Request a quoteOil pumps · Oil
Self-Priming Oil Transfer Pump
Self-priming oil transfer pumps for diesel, lubricating oil and compatible petroleum liquids. Selection depends on viscosity, temperature, flow and discharge pressure.
This photograph shows a configuration in the Oil range. The file does not identify an exact model number, so appearance and specifications must be confirmed before ordering.
Product overview
Where this pump may be used.
Oil transfer and project-specific liquid handling.
- Oil-transfer inquiries
- Project-specific fluid handling
Reference specification sheet
Parameters for an international quotation.
These values describe common enquiry formats in Europe and North America—not confirmed ratings for every JIABO model. The quotation and motor nameplate control the final specification.
| Primary duty data | Oil type, required flow, discharge pressure, suction lift and continuous or intermittent operating schedule. |
|---|---|
| Liquid data | Viscosity at minimum and maximum temperature, density, lubricity, additives and any entrained solids. |
| Electrical reference | Europe: 1 × 220–240 V, 50 Hz (smaller duties) or 3 × 380–415 V, 50 Hz. North America: commonly 3 × 230/460 V, 60 Hz. Confirm the exact motor nameplate before ordering. |
| Construction to specify | Pump principle, casing and internal materials, seal, connection standard, drive speed and any hazardous-area motor requirement. |
| Documents to request | Viscosity-corrected performance, absorbed power, suction limit, material compatibility and site-safety confirmation. |
Regional electrical examples are reference conventions supported by published manufacturer data: Grundfos 230/400 V, 50 Hz data ↗ and Franklin Electric 230/460 V, 60 Hz data ↗. Availability must be confirmed for the selected JIABO model.
Popular parameter reference
Selected KCB and 2CY gear-oil parameters
These exact entries come from the supplied workbook. Suitability still depends on oil viscosity, temperature, lubricity, suction conditions and seal selection.
| Model | Flow | Pressure | Vacuum | Connection | Motor |
|---|---|---|---|---|---|
| KCB55 | 3.3 m³/h | 0.33 MPa | 5 m H₂O | G1 in | 1.5 kW |
| KCB200 | 12 m³/h | 0.33 MPa | 5 m H₂O | G2 in | 5.5 kW |
| 2CY12/6 | 12 m³/h | 0.6 MPa | 5 m H₂O | G2 in | 5.5 kW |
| KCB483 | 29 m³/h | 0.36 MPa | 5 m H₂O | 70 mm | 7.5 kW |
Technical description
What to know before selection.
- Operating principle
Operating principle depends on the oil-pump model requested. - Configuration
Specify the required pump type, drive, and connection arrangement. - Liquid suitability
State oil grade, viscosity at operating temperature, and compatibility needs. - Typical use
Oil transfer and project-specific liquid handling.
Model specifications
Confirm the exact duty point.
A photo alone cannot establish a performance curve or exact SKU. Share these details to receive the matching model table, dimensions, and quotation.
- Oil type and viscosity
- Flow and discharge pressure
- Temperature, seal and material requirements
Need an exact model?
Send us your requirements.
Tell us the photo number, required flow and head or pressure, liquid, installation conditions, and power supply. We will confirm the model and current datasheet.