Request a quoteCentrifugal pumps · ZS
ZS 316 Stainless-Steel OEM Centrifugal Pump
OEM stainless-steel centrifugal pumps with 316/316L wetted-part options for water treatment, brackish water and selected seawater-treatment duties after chloride, temperature and crevice-corrosion review.
This photograph shows a configuration in the ZS range. The file does not identify an exact model number, so appearance and specifications must be confirmed before ordering.
Product overview
Where this pump may be used.
Water and process transfer where wetted-material selection matters.
- Seawater-treatment and brackish-water projects requiring alloy review
- Water transfer requiring corrosion-resistant wetted parts
- Industrial and pond-treatment systems
Reference specification sheet
Parameters for an international quotation.
These values describe common enquiry formats in Europe and North America—not confirmed ratings for every JIABO model. The quotation and motor nameplate control the final specification.
| Primary duty data | Required flow and total dynamic head at the design point, plus minimum and maximum operating flow. |
|---|---|
| Suction conditions | Source level, suction pressure, pipe length/diameter and available NPSH information where applicable. |
| Electrical reference | Europe: 1 × 220–240 V, 50 Hz (smaller duties) or 3 × 380–415 V, 50 Hz. North America: commonly 3 × 230/460 V, 60 Hz. Confirm the exact motor nameplate before ordering. |
| Construction to specify | Inline or end-suction layout, casing/impeller material, seal, flange standard and motor enclosure. |
| Documents to request | Performance and efficiency curve, NPSH curve, motor data, dimensions and allowable operating range. |
Regional electrical examples are reference conventions supported by published manufacturer data: Grundfos 230/400 V, 50 Hz data ↗ and Franklin Electric 230/460 V, 60 Hz data ↗. Availability must be confirmed for the selected JIABO model.
Popular parameter reference
Selected IH chemical-pump parameters
The supplied workbook includes these IH(IS) duty points. Use them as a hydraulic starting point for ZS stainless-steel OEM enquiries; 316/316L wetted parts and seawater suitability require separate material review.
| Model | Inlet | Outlet | Flow | Head | Motor |
|---|---|---|---|---|---|
| IH(IS)50-32-160 | 50 mm | 32 mm | 12.5 m³/h | 32 m | 3 kW |
| IH(IS)80-50-200 | 80 mm | 50 mm | 50 m³/h | 50 m | 15 kW |
| IH(IS)100-65-250 | 100 mm | 65 mm | 100 m³/h | 80 m | 37 kW |
| IH(IS)125-100-250 | 125 mm | 100 mm | 200 m³/h | 80 m | 75 kW |
Technical description
What to know before selection.
- Operating principle
A centrifugal impeller transfers energy to the liquid. - Configuration
Stainless-steel centrifugal series; confirm the exact wetted alloy and seal. - Liquid suitability
Liquids compatible with the selected stainless-steel grade and elastomers. - Typical use
Water and process transfer where wetted-material selection matters.
Model specifications
Confirm the exact duty point.
A photo alone cannot establish a performance curve or exact SKU. Share these details to receive the matching model table, dimensions, and quotation.
- Flow and total dynamic head
- Chloride level, pH, temperature and cleaning chemistry
- 316/316L wetted-part scope, seal and elastomers
- Power supply, flange standard and installation
Need an exact model?
Send us your requirements.
Tell us the photo number, required flow and head or pressure, liquid, installation conditions, and power supply. We will confirm the model and current datasheet.