Request a quoteSubmersible pumps · WQDX
WQDX Submersible Drainage and Dewatering Pump
Compact submersible drainage pumps for construction dewatering, flooded-area drainage, sumps and temporary clean or lightly contaminated water removal.
This photograph shows a configuration in the WQDX range. The file does not identify an exact model number, so appearance and specifications must be confirmed before ordering.
Product overview
Where this pump may be used.
Temporary water removal, sumps, and site drainage.
- Drainage duties
- Temporary water removal
- Compact submerged installations
Reference specification sheet
Parameters for an international quotation.
These values describe common enquiry formats in Europe and North America—not confirmed ratings for every JIABO model. The quotation and motor nameplate control the final specification.
| Primary duty data | Required flow and total dynamic head, pit depth, normal/minimum liquid level and installation type. |
|---|---|
| Wastewater data | Maximum solids size, fiber content, concentration, pH, temperature, abrasiveness and corrosiveness. |
| Electrical reference | Europe: 1 × 220–240 V, 50 Hz (smaller duties) or 3 × 380–415 V, 50 Hz. North America: commonly 3 × 230/460 V, 60 Hz. Confirm the exact motor nameplate before ordering. |
| Construction to specify | Free-standing or guide-rail installation, discharge size, cable length, impeller type, materials and level control. |
| Documents to request | Curve, solids passage, motor current, cable data, dimensions, submergence limit and approved control/protection arrangement. |
Regional electrical examples are reference conventions supported by published manufacturer data: Grundfos 230/400 V, 50 Hz data ↗ and Franklin Electric 230/460 V, 60 Hz data ↗. Availability must be confirmed for the selected JIABO model.
Popular parameter reference
Selected WQ submersible sewage parameters
These exact entries come from the supplied workbook. Confirm solids passage, cable length, installation arrangement and motor protection for the selected model.
| Model | Outlet | Flow | Head | Motor | Speed | Efficiency |
|---|---|---|---|---|---|---|
| 50WQ20-15-1.5 | 50 mm | 20 m³/h | 15 m | 1.5 kW | 2,900 r/min | 55% |
| 80WQ40-15-4 | 80 mm | 40 m³/h | 15 m | 4 kW | 2,900 r/min | 57% |
| 100WQ80-20-7.5 | 100 mm | 80 m³/h | 20 m | 7.5 kW | 1,450 r/min | 68% |
| 150WQ180-20-18.5 | 150 mm | 180 m³/h | 20 m | 18.5 kW | 1,450 r/min | 75% |
Technical description
What to know before selection.
- Operating principle
A submerged impeller lifts water from a low point. - Configuration
Compact submersible drainage arrangement. - Liquid suitability
Drainage water; confirm solids and abrasion limits for the exact model. - Typical use
Temporary water removal, sumps, and site drainage.
Model specifications
Confirm the exact duty point.
A photo alone cannot establish a performance curve or exact SKU. Share these details to receive the matching model table, dimensions, and quotation.
- Required flow and discharge height
- Liquid and solids characteristics
- Power supply, hose or pipe connection, and site conditions
Need an exact model?
Send us your requirements.
Tell us the photo number, required flow and head or pressure, liquid, installation conditions, and power supply. We will confirm the model and current datasheet.