Request a quoteCentrifugal pumps · IS
IS Single-Suction Centrifugal Pump
A single-suction centrifugal series listed in the company profile. Model dimensions and performance should be confirmed from its current datasheet.
This photograph shows a configuration in the IS range. The file does not identify an exact model number, so appearance and specifications must be confirmed before ordering.
Product overview
Where this pump may be used.
General water supply and industrial water transfer.
- General water transfer
- Industrial water systems
Reference specification sheet
Parameters for an international quotation.
These values describe common enquiry formats in Europe and North America—not confirmed ratings for every JIABO model. The quotation and motor nameplate control the final specification.
| Primary duty data | Required flow and total dynamic head at the design point, plus minimum and maximum operating flow. |
|---|---|
| Suction conditions | Source level, suction pressure, pipe length/diameter and available NPSH information where applicable. |
| Electrical reference | Europe: 1 × 220–240 V, 50 Hz (smaller duties) or 3 × 380–415 V, 50 Hz. North America: commonly 3 × 230/460 V, 60 Hz. Confirm the exact motor nameplate before ordering. |
| Construction to specify | Inline or end-suction layout, casing/impeller material, seal, flange standard and motor enclosure. |
| Documents to request | Performance and efficiency curve, NPSH curve, motor data, dimensions and allowable operating range. |
Regional electrical examples are reference conventions supported by published manufacturer data: Grundfos 230/400 V, 50 Hz data ↗ and Franklin Electric 230/460 V, 60 Hz data ↗. Availability must be confirmed for the selected JIABO model.
Popular parameter reference
Selected IS single-suction model parameters
These are workbook-listed model points. A model can have more than one speed or duty entry, so confirm the exact impeller diameter, speed and curve.
| Model | Flow | Head | Motor | Speed | Efficiency | NPSH |
|---|---|---|---|---|---|---|
| IS50-32-160 | 12.5 m³/h | 32 m | 3 kW | 2,900 r/min | 54% | 2 m |
| IS80-50-200 | 50 m³/h | 50 m | 15 kW | 2,900 r/min | 69% | 2.5 m |
| IS100-65-250 | 100 m³/h | 80 m | 37 kW | 2,900 r/min | 72% | 3.8 m |
| IS150-125-250 | 200 m³/h | 20 m | 18.5 kW | 1,450 r/min | 81% | 3 m |
Technical description
What to know before selection.
- Operating principle
Liquid enters one side of the centrifugal impeller. - Configuration
Single-suction centrifugal pump; connection layout varies by model. - Liquid suitability
Water-compatible liquids, subject to material and seal selection. - Typical use
General water supply and industrial water transfer.
Model specifications
Confirm the exact duty point.
A photo alone cannot establish a performance curve or exact SKU. Share these details to receive the matching model table, dimensions, and quotation.
- Flow and total dynamic head
- Liquid characteristics
- Installation and power supply
Need an exact model?
Send us your requirements.
Tell us the photo number, required flow and head or pressure, liquid, installation conditions, and power supply. We will confirm the model and current datasheet.