Request a quoteMultistage pumps · DG
DG Horizontal Multistage Pump
Horizontal ring-section multistage centrifugal pumps for high-head clean-water transfer, industrial pressure service and compatible boiler-feed duties.
This photograph shows a configuration in the DG range. The file does not identify an exact model number, so appearance and specifications must be confirmed before ordering.
Product overview
Where this pump may be used.
Higher-head industrial water transfer.
- High-head clean-water transfer
- Industrial pressure systems
- Compatible boiler-feed and process-water duties
Reference specification sheet
Parameters for an international quotation.
These values describe common enquiry formats in Europe and North America—not confirmed ratings for every JIABO model. The quotation and motor nameplate control the final specification.
| Primary duty data | Required flow (m³/h or US gpm) and total dynamic head (m or ft); also state inlet pressure and required discharge pressure. |
|---|---|
| Typical liquid | Clean water or compatible low-viscosity process liquid; provide temperature, chemistry and solids information. |
| Electrical reference | Europe: 1 × 220–240 V, 50 Hz (smaller duties) or 3 × 380–415 V, 50 Hz. North America: commonly 3 × 230/460 V, 60 Hz. Confirm the exact motor nameplate before ordering. |
| Construction to specify | Vertical or horizontal arrangement, stainless-steel grade, seal materials, inlet/outlet connection and motor enclosure. |
| Documents to request | Exact model curve, efficiency, motor current, dimensions, connection rating and approved materials list. |
Regional electrical examples are reference conventions supported by published manufacturer data: Grundfos 230/400 V, 50 Hz data ↗ and Franklin Electric 230/460 V, 60 Hz data ↗. Availability must be confirmed for the selected JIABO model.
Popular parameter reference
Selected CDL model parameters
These values come from the supplied JIABO parameter workbook. Use them to shortlist a model, then confirm the current curve, voltage, connection and materials before ordering.
| Model | Head | Flow | Motor | Speed |
|---|---|---|---|---|
| CDL1-10 | 57 m | 1 m³/h | 0.55 kW | 2,900 r/min |
| CDL4-8 | 64 m | 4 m³/h | 1.5 kW | 2,900 r/min |
| CDL8-10 | 92 m | 8 m³/h | 4 kW | 2,900 r/min |
| CDL16-8 | 94 m | 16 m³/h | 7.5 kW | 2,900 r/min |
| CDL32-60 | 81 m | 32 m³/h | 11 kW | 2,900 r/min |
Technical description
What to know before selection.
- Operating principle
Successive centrifugal stages raise discharge pressure. - Configuration
Horizontal multistage arrangement. - Liquid suitability
Water-compatible liquids, subject to model and material limits. - Typical use
Higher-head industrial water transfer.
Model specifications
Confirm the exact duty point.
A photo alone cannot establish a performance curve or exact SKU. Share these details to receive the matching model table, dimensions, and quotation.
- Required flow and total dynamic head
- Liquid temperature and water quality
- Suction conditions and NPSH margin
- Stage count, seal, motor and baseplate arrangement
Need an exact model?
Send us your requirements.
Tell us the photo number, required flow and head or pressure, liquid, installation conditions, and power supply. We will confirm the model and current datasheet.