Ask about engine pumpsJIABO · Engine-driven water pumps
Gasoline and diesel water pumps for off-grid jobs.
Choose an engine-driven pump when mains power is unavailable or a portable water-transfer setup is required. JIABO offers 1, 2, 3, 4 and 6-inch connection options; tell us your required flow, total head and application so we can identify the right engine and pump combination.
Initial range reference
Start with size, engine and duty point.
These are family-level figures supplied by JIABO, not one model's simultaneous operating point. Request the current model table and performance curve before ordering.
| Selection item | Range reference | Confirm for your model |
|---|---|---|
| Connection options | 1, 2, 3, 4 or 6 in | Exact inlet/outlet diameter, thread or flange and hose compatibility |
| Commonly requested engine | 20 HP | Fuel type, rated power, speed and pump pairing |
| Highest listed flow across the range | Up to 160 m³/h (about 704 US gpm) | Flow at your required total head on an exact-model curve |
| Highest listed head across the range | Up to 160 m (about 525 ft) | Head available at your required flow on an exact-model curve |
The 160 m³/h flow and 160 m head figures are separate range maxima. They are not a claim that one pump—particularly a 20 HP unit—delivers both at once.
Gasoline engine option
Portable water transfer.
Suitable use depends on the exact engine, pump end and site conditions. The reference photo below shows an engine-driven pump configuration, not a verified 20 HP or 160 m³/h model.
Diesel engine option
Factory-photographed diesel pump.
Send the required water flow, total head, suction arrangement and duty cycle to compare diesel-powered configurations. The factory photo does not identify the exact performance rating of the pictured unit.
Typical applications
Where engine drive may fit.
- Off-grid irrigation and farm water transfer
- Temporary construction-site drainage and dewatering
- Mobile water supply where suitable fuel storage and ventilation are available
For a model recommendation
What to send us.
- Required flow and total dynamic head at the same duty point
- Water source, suction lift, pipe or hose size and length
- Clean-water or solids-bearing duty; temperature and run time
- Gasoline or diesel preference, connection size and destination country
Selection and safety
Specify the liquid and installation.
These are engine-driven water pumps, not pumps approved to transfer gasoline or diesel fuel. Confirm exact-model liquid compatibility, exhaust ventilation, fuel handling and local requirements before installation.
Send an inquiry
Leave your pump requirements.
Include the model if known. For selection help, add the liquid, required flow, head or pressure, power supply, and installation conditions.